« Return to Previous Page

IBM 5912 IBM PCIX DDR Dual x4 SAS Adapter 44V5195

IBM 5912 IBM PCIX DDR Dual x4 SAS Adapter 44V5195

$250.00




  • Description

    Product Description

    PCI-X DDR External Dual – x4 Port SAS Adapter (FC 5912; CCIN 572A) Part Numbers 44V5195 35P1624 44V4414 44V8579 74Y8746

    Learn about the specifications and operating system requirements for the 5912 adapter.

    Overview

    The Peripheral Component Interconnect-X (PCI-X) DDR External Dual – x4 Port SAS Adapter is a low-profile adapter for high-performance and high-density, serial-attached SCSI (SAS) applications. The adapter provides two mini SAS 4x connectors, which allow the eight physical links to be used in various narrow and wide-port configurations. The adapter is a 64-bit, 3.3 V, bootable SAS adapter that provides RAID 0, 5, 6, and 10 capability. Some RAID level support is operating system dependent. The adapter provides RAID 0, RAID 5, RAID 6 and RAID 10 for AIX® and Linux®. Under the IBM i operating system, mirroring and data spreading is provided by the operating system and RAID 5 and RAID 6 is provided by the adapter.

    The adapter does not have write cache. (The write performance of RAID level 5 and RAID level 6 may be poor on adapters which do not provide write cache. Consider using an adapter which provides write cache when using RAID level 5 or RAID level 6.)

    The adapter can address up to 48 SAS disk drives, although the actual number of drives in a system is subject to the physical placement limitations of the system. Externally attached devices are designed to run at a data rate of 1.5 Gb/s for Serial Advanced Technology Attachment (SATA) devices, and 3 Gb/s for SAS devices. This card supports RAID and non-RAID DASD, tape, and optical devices. Feature 5912 supports the multi-initiator and high availability configurations.

    Important: See the SAS RAID controller for AIX or SAS RAID controller for Linux topics for more information and important considerations for multi-initiator and high availability configurations. See also Important partitioning considerations with dual-slot and multi-adapter configurations.
    Figure 1. PCI-X DDR External Dual – x4 Port SAS Adapter

    Specifications

    Item
    Description
    Adapter FRU number
    5912: 44V4413*
    * Designed to comply with RoHS requirement.
    I/O bus architecture
    PCI-X DDR
    Slot requirement
    One available PCI-X slot
    Cables
    SAS device attachment requires specific cables that are provided with the subsystem or device features being attached. See Serial-attached SCSI cable planning.
    Voltage
    3.3V
    Form factor
    Short, low-profile
    Maximum number
    See PCI adapter placement in the system unit or expansion unit.
    Attributes provided
    • Two external mini SAS 4x connectors provide attachment of SAS and SATA device enclosures
    • SAS Serial SCSI Protocol (SSP), Serial ATA Tunneling Protocol (STP), and Serial Management Protocol (SMP)
    • RAID 0, 5, 6, 10

      The write performance of RAID level 5 and RAID level 6 may be poor on adapters which do not provide write cache. Consider using an adapter which provides write cache when using RAID level 5 or RAID level 6.

    • Concurrent firmware update
    • Removable media device supported (Removable media is not supported in multi-initiator and high availability configurations)
    • 440 – 500 Mhz PowerPC (PPC)
    • Support for multi-initiator and high availability configurations (5912)

    Operating system or partition requirements

    This adapter is supported for the following operating systems:

    • AIX 5L™ Version 5.3 with the Technology Level 6 and Service Pack 4 (5300-06-04), or later
    • , or later
    • Red Hat Enterprise Linux version 5, with update 1, or later
    • SUSE Linux Enterprise Server 10, with service pack 1, or later
    • IBM i V5R4m5, or later
    • IBM i 6.1, or later
    The following versions are required for multi-initiator and high availability support:

    • AIX Version 6.1 with the 6100-01 Technology Level, or later
    • AIX 5L Version 5.3 with the 5300-08 Technology Level, or later
    • Red Hat Enterprise Linux version 4, with update 7, or later
    • Red Hat Enterprise Linux version 5, with update 2, or later
    • SUSE Linux Enterprise Server 10, with service pack 2, or later

    This adapter requires the following drivers:

    • AIX: devices.pci.1410bd02 device driver package
    • Linux:
      • Version 2.0.11.5, or later, for RHEL 4 kernels
      • Version 2.2.0.1, or later, for RHEL 5 kernels
      • Version 2.2.0.1, or later, for SLES 10 kernels
      • Version 2.3.0, or later, for kernel.org kernels (kernel version 2.6.20, or later)
  • Request a Quote
    CAPTCHA image
    Contact Info

    International Systems Management, Inc.
    5824-E Peachtree Corners East
    Norcross, GA, 30092
    USA

    Phone: 770.840.8994
    Fax: 770.840.9228
    Email: [email protected]


    Get in touch Today

    We are here to help you with all of your IT and server needs, please fill out the form or call us directly to get started today.

Free shipping on all orders to the USA