« Return to Previous Page

IBM 5580 5581 5708 Disk Controller with Aux Cache 39J5584 39J5581

IBM 5580 5581 5708 Disk Controller with Aux Cache 39J5584 39J5581

$550.00




  • Description

    Product Description

    Auxiliary-write cache IOA (FC 5580, 5581; CCIN 5708)

    5580 = 39J5057 2780 CARD + 39J5061 5708 CACHE CARD + 39J1702 CABLE CONNECTING TWO CARDS (5581 is same except uses 2757 disk controller card instead of the 2780)

    Learn about the specifications and installation notes for the auxiliary-write cache IOA adapter and the PCI-X Ultra4 RAID disk-controller adapters used with it.

    Feature 5580 includes a 2780 Peripheral Component Interconnect-X (PCI-X) Ultra4 RAID disk-controller adapter, a CCIN 5708 auxiliary-write cache IOA adapter, and the required connection cable. Feature 5581 includes a 2757 PCI-X Ultra RAID disk-controller adapter, a CCIN 5708 auxiliary-write cache IOA adapter, and the required connection cable.

    Figure 1. 5708, auxiliary-write cache IOA

    5708, auxiliary-write cache IOA
     A 
    SCSI port used to attach the auxilary-write cache IOA to a supported disk-controller. See Installing the SCSI cable.
     B 
    Unused SCSI port shown here with a cover over it.

    A physical cable connection is required between the 5708 adapter and SCSI port 4 of a 2780 or 2757 adapter. Both the 5708 adapter and the disk-controller adapter it is connected to must be installed in the same physical system unit or expansion unit, and must be installed in the same partition.

    The 5708 adapter has 757 MB of auxiliary maximum compressed write cache. The adapter mirrors the write cache of the disk-controller adapter that it is connected to. Protection of data is enhanced by having two copies of the write cache stored on separate adapters. If a failure occurs to the write cache of the disk-controller, the 5708 adapter provides a backup copy during the recovery of the failed IOA.

    Considerations for installing or converting to feature 5580 or 5581

    Attention: Converting your adapters to feature 5580 or 5581 will require extensive planning. If the planning is not done correctly, the result could be an extended server outage, loss of data, or both. You might need to do a full system restoration.

    Read the following questions in relation to your system:

    • Are you converting from feature 2780 to feature 5580?
    • Are you converting from feature 2757 to feature 5581?
    • Are you replacing any other existing storage adapters with features 5580 and 5581?
    • Is your server partitioned (LPAR)?

    If the answer to any of these questions is yes, or you are unsure of the answers, contact your authorized service provider for planning and deployment services.

    5708 adapter specifications

    Item Description
    Adapter FRU number 39J0686
    Battery FRU number 97P4846
    Cable FRU number 39J1702
    Cables Specific Storage Adapter to Auxiliary Storage Adapter SCSI cable is necessary and is provided with each feature or conversion.
    I/O bus architecture PCI 2.2 power/bus compliant
    Unit description
    • Long, 64 bit, 133 MHz, 3.3 V edge connector, single-slot
    • PCI-X 2.0 compliant
    • Compatible down to 32 bit, 33 MHz PCI adapter slots
    Operating system or partition requirements Supported in the IBM® i operating systems or partitions only, versions V5R2, V5R3, and later.

    If you are installing a new feature, ensure that you have the software required to support the new feature and that you determine if there are any existing prerequisites. To do this, use the IBM Prerequisite Web site at http://www-912.ibm.com/e_dir/eServerPrereq.nsf Link outside information center.

    Maximum number For system-specific adapter placement information, see the PCI adapter placement for machine types 82xx and 91xx or the PCI adapter placement for machine type 94xx topic collections. .
    Partition information
    • If you are placing the feature in the primary partition or any non-partitioned system, the auxiliary cache IOA for the load source adapter must be in the same enclosure as the load source IOA.
    • If you are placing the feature in the secondary partition on any system, the auxiliary cache IOA for the load source adapter must be under the load source IOP.
    Related information
    • The disk controller adapter and the auxiliary-write cache adapter each require one PCI slot.
    • Both adapters must be installed in the same enclosure.
    • The adapters are connected by a SCSI cable (provided).
    • The operating system identifies the 5708 adapter as a storage controller with no devices attached.
    • The 5708 adapter is not supported in an environment without an IOP.
    • Types 2780 and 2757 will not appear on ordering, shipping, or inventory documentation when received as part of these features.

    Installing the adapters

    For instructions on how to install PCI adapters, refer to the PCI adapters topic.

    Return here for instruction on installing the SCSI cable.

    Installing the SCSI cable

    The disk controller adapter and the auxiliary-write cache adapter are connected by a SCSI cable.

    Attention: Do not install or remove the adapter cable if the adapters have the power on. Use the service procedures to turn off the power to the adapter slots or shut down the system or partition in which the adapters are placed.

    To install the SCSI cable, do the following steps:

    1. Attach the SCSI cable to SCSI bus port 3 (fourth physical port) of the disk controller adapter.
      SCSI bus port 3
    2. Attach the cable to SCSI port  A  on the auxiliary-write cache adapter. See Figure 1.
    Note:

    1. Attaching the cable to the disk controller reduces the number of SCSI buses that support disk drives from four to three.
    2. Reducing the number of SCSI buses might also reduce the number of disk drives supported by the disk controller, depending on the system unit or expansion drawer in which the disk controller is installed.
    3. No disk drives are driven by the auxiliary-write cache adapter. This adapter protects against extended outage caused by loss of write cache, but does not protect against a disk controller failure.
  • Request a Quote
    CAPTCHA image
    Contact Info

    International Systems Management, Inc.
    5824-E Peachtree Corners East
    Norcross, GA, 30092
    USA

    Phone: 770.840.8994
    Fax: 770.840.9228
    Email: sales@ismweb.com


    Get in touch Today

    We are here to help you with all of your IT and server needs, please fill out the form or call us directly to get started today.

Free shipping on all orders to the USA